CAMERA FEED — CURRENTLY ACTIVE
Location: Throne Room Wing
Camera ID: TR-07
Status: Operational

Timestamp: 03:42:18
Audio: Enabled

Error
Log Data Corrupted...

Error Log:

[2026-01-08 # +0100] [CAMERA-CORE] ERROR 0xC1A7F042 :: CapturePipeline::AcquireFrame()
↳ DeviceID=UVC_CAM_046D:0825 (USB3.1, Bus 002, Port 4)
↳ FirmwareRevision=2.14.7 | Driver=uvcvideo 6.6.12-arch1-1
↳ StreamProfile=1920x1080@30.000fps (YUYV)
↳ SyncMode=HardwareTimestamp | ClockDrift=+3.27ms

Frame acquisition failed: buffer dequeue timeout exceeded (timeout=5000ms).
Last successful frame index=184517 | DroppedFrames=21 | Jitter=14.1%
DMA transfer stalled during URB submission phase.
USB endpoint returned status=-110 (ETIMEDOUT).

Recovery sequence initiated:
- Stream flush requested
- Isochronous endpoint reset
- Power cycle hint issued (soft-reset)

Result: RECOVERY_FAILED
Reason: device did not acknowledge stream renegotiation within allowed window.
Suggested action: reinitialize capture graph or physically reconnect device.

Telemetry:
usb.err=-110
uvc.state=STREAMING->STALL->RESET_PENDING
ringbuf.fill=0.00%
last_urb_submit=+5021ms

DiagnosticNote (opaque, base64):
TUFSSU8gQ0FOIEhFQVIgWU9VCllPVSBORUVEIFRPIFJVTiBCRUZPUkUgSVQnUyBUT08gTEFURQpBTkQgVEhFIEJMT09EIFNUQVJUUyBCT0lMSU5H

Stack trace:
at Camera::CapturePipeline::AcquireFrame() +0x1F4
at Camera::UVCBackend::ReadStream() +0x2A1
at Camera::DeviceManager::PollDevices() +0x87
at MainLoop::Run() +0x3C