FA+
Shop
251 submissions
Here is the finished update to the Random Sample & Hold module. It's got 4 noise sources going to 4 S&H circuits. Each is clocked independently. Really looking forward to using this, since I have used my previous version quite a lot lately.
The other module I was really looking forward to was the micro-Noise I made. However, there seems to be some issue with the PCB so it will need some troubleshooting (and likely re-design). I also spent some time troubleshooting the Befaco Rampage that I just finished building. The "fall" section of channel A was having some strange behaviors. But I reflowed a few shoddy solder points and double checked that there was no issue with the slider pot. Things are working much more as expected now, so I am calling that one finished.
I also finished the internal LED lighting module. It works, but maybe not quite as I was expecting. I'll keep it for now, but I will probably (eventually) re-design that one too. We'll see.
Next on the agenda is finishing up the 8 step trigger sequencer. Waiting on a couple of components, but should have it done by this weekend.
The other module I was really looking forward to was the micro-Noise I made. However, there seems to be some issue with the PCB so it will need some troubleshooting (and likely re-design). I also spent some time troubleshooting the Befaco Rampage that I just finished building. The "fall" section of channel A was having some strange behaviors. But I reflowed a few shoddy solder points and double checked that there was no issue with the slider pot. Things are working much more as expected now, so I am calling that one finished.
I also finished the internal LED lighting module. It works, but maybe not quite as I was expecting. I'll keep it for now, but I will probably (eventually) re-design that one too. We'll see.
Next on the agenda is finishing up the 8 step trigger sequencer. Waiting on a couple of components, but should have it done by this weekend.
Category All / All
Species Unspecified / Any
Size 1280 x 960px
File Size 194 kB
having a sum output or some kind of comparator chain with 1+2, 3+4 or some kind of routing you could control with switches would be sweet. I still think you should do a saturation\clipping circuit with different kinds of diodes. Hard and soft clipping sounds really great and it would compliment your system.
Yeah I realize there is a ton of stuff that can be done with this. I'm just taking it one step at a time. :)
For the diode clipping thing you mention, would that be the same as a diode ladder filter?
I had sort of added that on my to-do list, but have not gotten to it yet.
For the diode clipping thing you mention, would that be the same as a diode ladder filter?
I had sort of added that on my to-do list, but have not gotten to it yet.
There are different places\ways to implement diodes for soft or hard clipping, but this video has a good explanation plus 2 pictures of circuits for soft clipping\saturation and hard clipping\distortion. https://www.youtube.com/watch?v=yj53Q-pisbw
Comments