Just finished re-furring the guy last night and getting the new teeth done (see next photo). It's still a WIP.

Also note I don't have either my head or a manikin head in it so it's a bit out of shape.

The ears need slight changes to improve their look and will be done soon.

The gray thing on the side is the battery pack for the 12V fan that hangs down the front of the head to my chest area since there really isn't room for the battery pack in the head without some compromise.

BUT there is a 3V battery pack in the head (3 bats vs 8 for the 12V system). It powers the LEDs in the eyes. I'll see if I can get a good photo of the lit eyes. These are my first 3D eyes that I finally got done despite trying before. Still some room for improvement as the "cone" around the eyes that help with the effect was not angular enough and other adjustments.

Not really a good photo as things are slightly crooked, etc. It's an in progress shot.

Learned a lot from working on it to make the rabbit head far better. That's going to be started soon.