* I WILL NOT reply to questions that were answered either here or by Qarrezel's tutorial, or by visiting the smooth-on website. Do not be offended if I don't answer such things but I simply don't have the time. *

↓THIS IS IMPORTANT ↓
◘ Read all directions with any substances you use and take all safety precautions. I will not be held responsible for people too dumb to read. ◘

*◙This is my first time doing this, I'm sure that there's something, somewhere, that I did wrong. On top of that there are things that could be done better as well. Don't use this as a tutorial, It's meant more to just give a little more of an idea behind how this is done.◙*

Head Form: http://www.monstermakers.com/produc.....life-size.html don't use the small styrofoam ones, they aren't the proper size.

Clay: Make sure its sulfur-free, I used soft Prima Plastilina.

Silicone/Resin/everything else you need: http://www.smooth-on.com/Getting-St.....218/index.html enough to make one head :3

Along with these you will need;
Disposable mixing cups
Sticks for stirring
Disposable brush
Gloves

5. Put both A and B into the extra cup, no thickener with this you need it a bit goopy to get into all the crevices.

6. Mix both thoroughly, making sure to scrape the sides often (this was about halfway because I'm OCD with it).

7. Starting to brush the silicone on, this is to get the detail first so make sure to get it in the important places.

8. Nearly done with that, but it will drip all over for a while. I just kept wiping it back up with the brush and threw it back on the head.

Part 1: http://www.furaffinity.net/view/8395451/
Part 2: http://www.furaffinity.net/view/8395451/
Part 3: http://www.furaffinity.net/view/8395532/

There is a better, actual, tutorial here
1. http://qarrezel.deviantart.com/gall.....80403#/d1p7axf
2.http://qarrezel.deviantart.com/ga.....80403#/d1p7sgk
3.http://qarrezel.deviantart.com/ga.....80403#/d1p7wjy