301 submissions
woot! just finished airbrushing and sealing these chompers... almost ready to install in the resin blank!
(top view)
(top view)
COMMISSION STATUS: click here to see our status!
PRICELIST FOR BASES/TONGUES/JAWSETS/PAWPADS/ETC. | HEAD+PARTIAL PRICES | QUEUECategory All / Fursuit
Species Wolf
Size 950 x 633px
File Size 380.6 kB
Top jaw: About 3 in. wide at the back, 2 1/4 in. wide at the front.
Bottom jaw: Just under 2 1/2 in. wide at the back, just above 1 3/4 in. wide at the front
Length: Just over 4 in. long for both top and bottom.
This is based on the one that we have installed in our current wolf base; we had to shape the jawset with a Dremel to have it fit inside our mask though. And $15 is without the shipping.
Bottom jaw: Just under 2 1/2 in. wide at the back, just above 1 3/4 in. wide at the front
Length: Just over 4 in. long for both top and bottom.
This is based on the one that we have installed in our current wolf base; we had to shape the jawset with a Dremel to have it fit inside our mask though. And $15 is without the shipping.
FA+

Comments