FA+
Shop
339
Views
Views
1
Favorites
Favorites
Category
All / All
Species Unspecified / Any
Size 2285 x 1613
File Size 2.05 MB
Report this content
★
More from Tank50us
Listed in Folders
Before I get started, I should note that the cost is the estimate for all the work and parts, and is an estimate
As a few of you know, early last year I purchased my first firearm. A TriStar Cobra 12 Guage.
Since then, I've acquired a few others, including an M1 Garand which I'm restoring. This year, I'm looking to start a new project, a Winchester Model 1917. The details on the rifle itself I'm not 100% sure of since it's not yet in my possession, but the one thing I do know, is that 90% restoration is possible, and I'm going to go for it.
The only drawback is the cost.
I can afford to purchase the rifle, but it's a tough cost to fully justify. So, I'm asking you guys if you'd like to pitch in, and help restore this piece of military history from the sporterized look it has now, to the proper look it's supposed to have. For those wondering what "Sporterized" means, it simply means that parts of the rifle (in this case the stock and rear sight), are cut down in order to make the rifle more appropriate for hunting or sports shooting. The reason this can be an issue for a rifle like the M1917 is due to the kick of a 30-06 cartridge. They. Thump. Hard. Also, I prefer these rifles be in as to original configuration as possible.
What's so significant about the M1917? Well, for those not in the know, the Winchester Model 1917 is based on the SMLE bolt design, and was built to US Army Specs for the Great War (World War 1). The rifle was issued to the US Army Expeditionary Forces that were shipped to Europe. Not every unit had this rifle obviously, many used the M1903. But most units, including the 82nd Infantry Division, used the M1917 (that includes Sergeant Alvin H. York).
Now, what's the plan for the rifle? Well, the important bit is to replace the stock with a proper stock, and reinstall the missing bits as much as possible. The rear sight on this one was milled away to make room for a scope mount, but the 'bridge' is still there. The plan here is to tap it for a Picantiny rail, and mount either a new rear sight or a holographic sight. Either option will give the rifle back its silhouette.
Now, I'm not looking to get money for nothing, so this is more an advertisement that I'm open for commissions. If you're interested, use the links below. If you're looking to just pitch in, and don't want anything in return, then just donate through KoFi, and in the message box type "M1917R" to signify that you're not wanting anything in return.
Links:
KoFi: https://ko-fi.com/tank50us
Square: https://dragon-digital-designs.square.site/
To anyone that donates, I will greatly appreciate it. If you are looking to get a commission, I look forward to working with you!
As a few of you know, early last year I purchased my first firearm. A TriStar Cobra 12 Guage.
Since then, I've acquired a few others, including an M1 Garand which I'm restoring. This year, I'm looking to start a new project, a Winchester Model 1917. The details on the rifle itself I'm not 100% sure of since it's not yet in my possession, but the one thing I do know, is that 90% restoration is possible, and I'm going to go for it.
The only drawback is the cost.
I can afford to purchase the rifle, but it's a tough cost to fully justify. So, I'm asking you guys if you'd like to pitch in, and help restore this piece of military history from the sporterized look it has now, to the proper look it's supposed to have. For those wondering what "Sporterized" means, it simply means that parts of the rifle (in this case the stock and rear sight), are cut down in order to make the rifle more appropriate for hunting or sports shooting. The reason this can be an issue for a rifle like the M1917 is due to the kick of a 30-06 cartridge. They. Thump. Hard. Also, I prefer these rifles be in as to original configuration as possible.
What's so significant about the M1917? Well, for those not in the know, the Winchester Model 1917 is based on the SMLE bolt design, and was built to US Army Specs for the Great War (World War 1). The rifle was issued to the US Army Expeditionary Forces that were shipped to Europe. Not every unit had this rifle obviously, many used the M1903. But most units, including the 82nd Infantry Division, used the M1917 (that includes Sergeant Alvin H. York).
Now, what's the plan for the rifle? Well, the important bit is to replace the stock with a proper stock, and reinstall the missing bits as much as possible. The rear sight on this one was milled away to make room for a scope mount, but the 'bridge' is still there. The plan here is to tap it for a Picantiny rail, and mount either a new rear sight or a holographic sight. Either option will give the rifle back its silhouette.
Now, I'm not looking to get money for nothing, so this is more an advertisement that I'm open for commissions. If you're interested, use the links below. If you're looking to just pitch in, and don't want anything in return, then just donate through KoFi, and in the message box type "M1917R" to signify that you're not wanting anything in return.
Links:
KoFi: https://ko-fi.com/tank50us
Square: https://dragon-digital-designs.square.site/
To anyone that donates, I will greatly appreciate it. If you are looking to get a commission, I look forward to working with you!
Category All / All
Species Unspecified / Any
Size 2285 x 1613px
File Size 2.05 MB
Comments