So some of you who chat with me on a regular basis know I'm into 3D printing. These are a few of my bigger projects. These are all works in progress to an extent and are about 90-95 percent fully 3d printed. Everything on them is printed aside from the screws that hold them together, the electronics that make them move/steer, and bearings to help the wheels and gearboxes spin smoother.

The van is RWD, inspired by "The A-Team" which is an action show from the 80's I grew up watching. Has a full interior. Independent front suspension and a straight axle in the rear.

The green Challenger is RWD as well, and just cool. A little less detailed than the others with no interior. Basically a shell on a printed chassis. There is very little suspension.

The brown Land Cruiser is a neat little off road rig. 4x4 straight axles front and rear. With a full interior.

The teal K20 Pickup is the least completed. 4x4 with independent front suspension and a straight axle in the rear. This one also has metal driveline/gearbox bits where the other models have fully printed gearboxes and drive shafts.