Image 1 of 3.

Modeled while listening to Stone Sour's 'Say you'll haunt me' one night after playing some Halflife 2 and examining the wreckage of a shot down Hunter copter, that explains the tail rotor.

The Puddle Jumper, sometimes shorterned to PuJu (Pew-jew) ((i suck at abreviating stuff)), is a VTOL Heli used by both the Rebels and the GFA to provide an effective gunship ( x3 killages on both wings), an Interceptor (current set up) or a Siege gunship (x1 Anti-Tank Missile Rack per wing & x1 Anti-personell/light armor rocket rack per wing).

The Puddle Jumper has a somewhat unique set up for the wings that have the fans built into them. Rather than the usual set up the designers desired to make the Puddle Jumper light enough that it could be highly manueverable but still be able to take a full load of weapons.

As far as the weapons go the Anti-Tank racks hold 14 missiles per rack and the anti personell/light armor racks hold 24 rockets per rack. The Killage's fire 50mm bbs using their coil gun properties to pepper desired targets effectively chewing them up beyond the ability to operate. Each drum beneath a Killage holds close to 600 bbs each. The Killage 50mm has proven to be effective against light armor, and some heavy armor as well as highly effective against soft human targets.

The Puddle Jumper's pilot enters through a hatch at the rear of the ship at the base of the tail. The canopy can be ejected to allow the pilot to jetison himself and his seat out of the Puddle Jumper should it be damaged and begin to crash.


Currently decided if i should include counter rocket/missile flares onto the Puddle Jumper, it would take maybe an hour to do so at night though unsure when i'd be able to post an image of the PuJu with defensive flares.

Modeled in Google Sketchup 7.

Enjoy~