FA+
Shop
670
Views
Views
14
Favorites
Favorites
Category
All / Fursuit
Species Avian (Other)
Size 1280 x 960
File Size 177.4 kB
Report this content
More from Hoofburd
Listed in Folders
For more in-action images, check the twitter post! https://twitter.com/Horseburd/statu.....63853514919940
So last summer, I made a toucan beak. Now, I decided: What if it could be BIGGER
This is nearly as long as my extended arm and features a three-point strap setup like a gas mask. This was printed in PETG with a .6mm nozzle and is relatively light, considering the size. The straps keep it feeling lightweight.
To buy this file for yourself, here it is on Gumroad: https://horseburd.gumroad.com/l/zmQPdm
Here's a smaller medium-size one: https://horseburd.gumroad.com/l/rKVEO
And here's the original small one:https://horseburd.gumroad.com/l/NJAEV
So last summer, I made a toucan beak. Now, I decided: What if it could be BIGGER
This is nearly as long as my extended arm and features a three-point strap setup like a gas mask. This was printed in PETG with a .6mm nozzle and is relatively light, considering the size. The straps keep it feeling lightweight.
To buy this file for yourself, here it is on Gumroad: https://horseburd.gumroad.com/l/zmQPdm
Here's a smaller medium-size one: https://horseburd.gumroad.com/l/rKVEO
And here's the original small one:https://horseburd.gumroad.com/l/NJAEV
Category All / Fursuit
Species Avian (Other)
Size 1280 x 960px
File Size 177.4 kB
Listed in Folders
I should be able to separate the halves relatively easily, but you’d need to figure something out for hinging it. The model doesn’t go back as far as the wearer’s jawline, so that’s why I didn’t hinge it originally. But if you want to sort out that bit, I’ll see what I can do about separating the halves.
Comments