Had to fix up some feetpaws I made a few months back! The orginal long claws were too long so they busted open from scraping on the concrete/ground, then the old zipper wasn't very strong to hold these slim feetpaws together so it busted open as well.

So I fixed all that and did some more fixes while they were here!
All the fixes I did:
- Added a new thicker zipper
- Made new shorter claws to replace the old busted long ones
- Redid the foam padding for the inside top of the feet
- Replaced the old EVA bottoms with new EVA bottoms (old ones were torn up)
- Touch up shaved everything
- Resewed all seams (minus the green bits and the toes) with the sewing machine so everything held together better
- Removed about half the stuffing from the digi padding since it was making the legs a little tight for the owner to wear well

Hopefully all these fixes make the feetpaws better and hold up better than before! But you can find the owner in these feet, as well as matching handpaws, armsleeves, and a tail walking around at TFF coming up! :)

Tomorrow I work on another pair of TFF deadline feetpaws I have! And also hopefully making the base for delestwolfs (Instagram) feetpaws as well if everything goes well with the other feetpaws!