FA+
Shop
Work in progress, something new for you!
by shynjy
Digital Artist
9 years ago
So, I have decided to dive into 3D printing again, give it another try, and this time it's working mush better than before!
This model was built, rigged, posed, then 3D printed all by myself, and is about 8 inches tall.
He still needs a lot of work, like sanding and fixing up some areas , but he is nearly ready to be painted!
Depending on how this example model turns out, I most likely will be offering custom prints like this for commission. Let me know your thoughts and questions in the comments if you have any! :3
This model was built, rigged, posed, then 3D printed all by myself, and is about 8 inches tall.
He still needs a lot of work, like sanding and fixing up some areas , but he is nearly ready to be painted!
Depending on how this example model turns out, I most likely will be offering custom prints like this for commission. Let me know your thoughts and questions in the comments if you have any! :3
1162
Views
21
Comments
18
Favorites
General
Rating
Category
Sub-Category
Species
Resolution
File Size
All
All
Unspecified / Any
1280 x 1280
285.5 kB
So want something like this!
You did ask for questions, sooooooo....
Will they be painted or is that at least an option?
Do you have rough price guideline available?
Can you print taurs?
Are accessories such as googles, shoulder bags, spears, swords, guns, telescopes, etc doable? Or is case by case kinda thing?
Max dimensions?
Have you considered posable/articulated figures?
As for answers:
Yes they will be painted,I do preffer to paint them myself :3
I do have a rough price, that I would LIKE to offer these for, but I'm still open for suggestions aswell, I've gotten a few suggestions saying 250-300 , which Is the general ballpark I would like to charge in,considering the amount of time and work it takes to make one of these
Yes, I can adsolutly do taurs! I could make any species honestly.
Asseccories are very doable! And would not cost extra if it is something like what you mentioned. If it's something bigger like a bike or furnature, THAT may cost extra
Max dimensions are a bit hard to guess, I make the 3D model without restrictions, then slice and "print" the model in pieces, in order to cut printing times and dimension restrictions, this particular model came out to be around 8 inches tall, if you look how big he is compared to the soda can, that will be the scale that I go for.
I have actually considered poseable, articulated models, though I haven't been able to test that out yet, though I would be glad to, and will test around with that most definitly!
$250-300 is a decent chunk of budget atm, but definitely not out of. proportion for a custom sculpture.
Does price include the paint job or is that a separate charge, if separate how much.
If included definitely a bargain, if not still worth it in my opinion.
Hmmm... this is only a guess but I imagine Bast's taur dimensions, if sitting/standing would be roughly
8 inch high x 2.5 to 3.5 inch wide x 9 in long maybe more depending on tail position
Tho i would likely want front end standing on some slightly elevated piece of landscape so likely
10 H x 2.5-3.5 W x 9 + inches L again depending on tail
Is this still within your size/price range?
Your measurements seem like a very good guestimate. With would most likely be leaning more towards the 3.5 . Then again, that is if he is just standing straight. Porportion ally he will be that big, but how tall the model is, would depend on his over all positioning!