FA+
Shop
1052
Views
Views
9
Favorites
Favorites
Category
Fursuiting / Fursuit
Species Unspecified / Any
Size 2000 x 2000
File Size 5.22 MB
Report this content
More from Riiya
F5 FOR HIGHER QUALITY PHOTO! Hey guys! So I'm running dangerously low on craft materials right now like resin, and I'm also trying to clean out space in my workroom for new items, and so when I move, I don't have to worry about taking so much with me lol. So what these items mean by "faulty" is that they were not perfectly casted/molded. Many have micro to large bubbles, chunks missing or some other defects. They are NOT perfect, but can be used for lower-budgeted projects!
Starting from the upper left!
1.) Faulty ultracal k9 pawpad mold. This was my first mold and it DOES work, and you can cast silicone or latex pawpads in it, but one of the outside edges (along the right side finger) is a little lower than the rest of the mold, so less silicone/latex needs to be poured into it. Just be careful :) This sucker is a bit heavier, so shipping might be a bit more expensive! $12
2.) Misc. Molds. I have a very old hinge mold in here that were for the hinges I used on this guy here to give him a moving jaw after he was cut!: http://www.furaffinity.net/view/12313230/ There is also a toony eye blank mold in here. You can cast resin toony scleras for your eyes in here. Might require a bit of sanding after the initial pull. There is only ONE mold for this. Either mold is $5, or $10 for both
3.) Faulty Toony Hyena Nose Mold and Ultracal K9 Tongue Mold. **Note, the hyena nose mold does NOT stand by itself, and might need a bit of support (you can prop it up in a plastic cup or make a wire basket-like frame for it**. Ultracal k9 tongue mold has bubbles in the mold, and is a bit heavier so shipping might be more expensive. Hyena mold: $7, Tongue mold: $4
4.) Bag of Faulty Claw Molds. All of these molds are very old as I had made them when I first started out with suitmaking, some for larger and others for smaller claws. They definitely aren't perfect, but they work. **Note, one of these molds, the one with the writing, does not stand up on its own. It needs support off your table/casting space**: $10 for all of them.
5.) Lot of Faulty silicone-cast items:
-Single black k9 pawpad: This actually didn't turn out too bad and doesn't have many bubbles! This was pulled from the same pawpad mold shown above. $9
- (right side) Two bubbly miscast small k9 noses, one black, one pink and brown. They have bubbles in the sides where it didn't adhere 100% correctly to the fabric that was placed on top of them. $2 each
-(below noses) Lot of 5 faulty tongues, one sea-green, one black, two sparkle-blues, one sparkle ice-blue. All of these have bubbles/gaps/chunks missing. When placed in one of the fully-encasing jawsets shown below, they are much less noticeable. $5 for all of them.
-(bottom left) Two faulty-cast toony hyena noses in black. Small bubbles, but otherwise okay! You can cut them out of the current fabric and re-glue them to more fabric before installing them on your head. $4 each.
6.) Bag of 32 Miscast Claws (black and white), and Bag of 10 "Bad" Miscast Claws (black and white, with a miscast toony k9 nose). The bag of 32 claws are all in variable sizes, and some of the claws are actually sculpted from black fimo clay. They're much older models of molds, some of them from the claw molds being sold above. The bag of 10 claws I don't even.... lol. The nose is decent but this bag of claws I will just include with anyone's purchase. I don't really reccommend using them-- I just need them out XD $15 for the 32 bag. The bag of 10 with the nose free lol.
7.) Lot of 12 faulty jawsets. Some of these are already painted and ready to install, and come from different makers. I just have nowhere to use them! They have things like microbubbles though or deformed/missing teeth, though not all of them are bad. **NOTE (Edit) NONE of these jawsets are to be reproduced/remolded for your own use!** $13 for all of them. SOLD
Just comment if you're interested!
Category Fursuiting / Fursuit
Species Unspecified / Any
Size 2000 x 2000px
File Size 5.22 MB
It's up for sale now! Shipping to Australia is a little expensive. Its $17, so you can send $27 total to wolfgirl2634[at]yahoo.com if you're still Interested.
It is indeed still open. You can send $22 to wolfgirl2634[at]yahoo.com , and please include your address! If you do It quickly enough, I might be able to send it out today with the other items :)
I'm sorry about the slow reply! I had given the box to my mother to ship out weeks ago on a busy day for me and apparently she forgot to, and actually had forgotten it in her car (she's mentally disabled, so memory loss is a normal thing.) She told me she sent it out weeks ago, but I found it today under one of the seats .___. ... I -did- indeed send it out today with priority 2 day, so it should be there by Friday
Comments