I used another rough template on the front, I then cut the template with my hot knife, I also cut the slots cot the face guard into the top piece. I then uses the hear gun to curl the armor so the top layer would fit over the contoured belly armor. I beveled the edges with my dremel tip. Its not done yet I'll use the hot knife to even out the face guard. I'll then patches to cover the gap in the sides of the breastplates. After that I'll be installing under lighting in the face plate and I'm going to install lights in the sides of the contoured belly armor. It'll be set so that you can't see the leds themselves but the light should shine across the armor. I'm thinking reds, for the lights