FA+
Shop
Claws pricing information!
16 years ago
General
Relating to my recent posts of the resin claws I produce:
Regular: http://www.furaffinity.net/view/2804119
Glowies: http://www.furaffinity.net/view/2808251
Claws are in three sizes; 3, 4 and 5cm long. That's Small, Medium and Long.
They're cast in a polyurethane resin reinforced with calcium carbonate.
Small has a base price of £1, Medium is £1.10 and Long is £1.20.
For stripes add 50p per claw per extra colour.
For glow in the dark add 75p per claw (this premium quality glow powder is expensive. Supply of Green is in stock, other colours will need time to order in)
To have an LED mounted add 50p per claw. Can be clear or translucent. Add 10p extra per for translucent colour (advised, diffuses colour better).
To have glowing striped claws (LED within a striped claw) add £1 per claw. This is still at the experimental stage and fiddly work so my losses are higher.
To have the claws made in rubber (good for footpaws) add 50p per claw.
Clear or translucent claws with other fillings are negotiable.
Colours will be mixed by eye. If exact colour matching is needed I recommend specifying in international panatone colours.
If the colours need to be absolutely accurate then there may be an additional fee.
Some combinations are not possible. For example the rubber claws cannot be translucent or readily fitted with LEDs as the rubber is too dense.
Claws are cast from quality silicone moulds taken from hand-carved oak masters, giving the final product a glossy finish with a realistic grain.
All claws are designed to be sewn in place to the end of the glove finger, giving superior retention. The base of each claw is drilled with 8 holes and a central recess for threads to cross.
Most claws and the are fully degassed in a vacuum chamber at the mixing AND casting stages to ensure against trapped bubbles weakening the casting, or visible bubbles in the case of clear/translucents. Striped claws however cannot be degassed at the casting stage or the layers will bleed into each other, so striped claws may be fractionly weaker than single-colour claws.
Yes I'm in the UK, and yes I will post internationally. Shipping is worked out on an order by order basis.
And yes I produce other items too, but I'm still finalising them for routine production. Noses, paw-pads and more.
Regular: http://www.furaffinity.net/view/2804119
Glowies: http://www.furaffinity.net/view/2808251
Claws are in three sizes; 3, 4 and 5cm long. That's Small, Medium and Long.
They're cast in a polyurethane resin reinforced with calcium carbonate.
Small has a base price of £1, Medium is £1.10 and Long is £1.20.
For stripes add 50p per claw per extra colour.
For glow in the dark add 75p per claw (this premium quality glow powder is expensive. Supply of Green is in stock, other colours will need time to order in)
To have an LED mounted add 50p per claw. Can be clear or translucent. Add 10p extra per for translucent colour (advised, diffuses colour better).
To have glowing striped claws (LED within a striped claw) add £1 per claw. This is still at the experimental stage and fiddly work so my losses are higher.
To have the claws made in rubber (good for footpaws) add 50p per claw.
Clear or translucent claws with other fillings are negotiable.
Colours will be mixed by eye. If exact colour matching is needed I recommend specifying in international panatone colours.
If the colours need to be absolutely accurate then there may be an additional fee.
Some combinations are not possible. For example the rubber claws cannot be translucent or readily fitted with LEDs as the rubber is too dense.
Claws are cast from quality silicone moulds taken from hand-carved oak masters, giving the final product a glossy finish with a realistic grain.
All claws are designed to be sewn in place to the end of the glove finger, giving superior retention. The base of each claw is drilled with 8 holes and a central recess for threads to cross.
Most claws and the are fully degassed in a vacuum chamber at the mixing AND casting stages to ensure against trapped bubbles weakening the casting, or visible bubbles in the case of clear/translucents. Striped claws however cannot be degassed at the casting stage or the layers will bleed into each other, so striped claws may be fractionly weaker than single-colour claws.
Yes I'm in the UK, and yes I will post internationally. Shipping is worked out on an order by order basis.
And yes I produce other items too, but I'm still finalising them for routine production. Noses, paw-pads and more.
